AWS: SFA
EN ISO CODE:
A customized gas-shielded flux-cored wire is
designed for the fabrication of a new die and the rebuilding
of worn-out hot forging dies. The wire
has a very good welder's appeal and easy slag
detachability. The deposited weld metal is tough
for hot or cold work tooling. It is free from cracks,
porosities, and any other surface defects.
LoTherme GS-9580 wire is suitable for trimmers, shear, blanking & forming
dies, punches, header dies, forging dies, hot working tools & guides, etc.
Argon-CO gas mixture & CO 2
Element | C | Mn | Si | S | P | Cr | Ni | Mo | V | W |
Typical | 0.38 | 1.47 | 0.82 | 0.014 | 0.019 | 5.4 | 0.67 | 1.84 | 0.28 | 1.9 |
On a 3-layer deposit in as-weld condition: 55-57 HRC
Diameter (mm) |
Current Range (Amps) |
Voltage(V) | Stick Out (mm) |
2.4 | 200 – 300 | 26 – 30 | 30 – 40 |
2.8 | 250 – 350 | 26 – 30 | 30 – 40 |
2.4 and 2.8
Note: Any other diameter wires may be available on request.
The wire is supplied in a layer wound 12.5 kg plastic spool.
Each spool is sealed in a polythene bag and then packed in a shrink-wrapped
corrugated box.
Note: Any other type of packaging may be available on request.